Cleaning Fiberglass Tub After Installation

Remove any loose debris from surface.

Run tub full of warm water and mild detergent as hand dishwashing liquid or laundry detergent; soak for 1/2 to 1 hour; drain and rub surface with sponge, rag, or non-abrasive applicator; rinse thoroughly.

If grease, oil, tar stains:

Spray with home laundering spray pre-wash; rub lightly with sponge or non-abrasive applicator; rinse.

If ceramic adhesives or paints:

Follow solvent methods above under "tough stains".